Takardar bayanan APET

Takardun APET Antistatic bambance-bambancen na musamman ne na Takardar APET tare da ginanniyar kaddarorin antistatic, musamman ƙera don marufi da jigilar kayan aikin lantarki masu ƙarfi. Tare da juriya mai sarrafawa na 10⁹ zuwa 10⊃1; ⊃1; Ω/sq, a amince yana watsar da cajin lantarki kuma yana hana ESD (fitarwa na lantarki) lalacewa ga ICs, PCBs, semiconductor, da sauran ingantattun kayan lantarki.

Ba kamar fina-finan antistatic masu rufi ba, APET na Ɗaya Plastics na antistatic yana amfani da wakili na dindindin wanda aka rarraba a cikin matrix ɗin kayan. Wannan yana nufin aikin ɓarna a tsaye ba zai ƙare ba, wankewa, ko ƙasƙanta yayin ajiya, jigilar kaya, ko maimaita mu'amala - kiyaye amintaccen kariya ta ESD na tsawon watanni 12 ko fiye.

Takaddun APET ɗin mu na antistatic ya haɗu da kyakkyawan ingancin gani (≥89% watsa haske), ƙarfin injina, da thermoformability na daidaitaccen APET tare da aikin sarrafa-tsaye. Idan aikace-aikacenku baya buƙatar kariyar antistatic, mizanin mu bayyanannen takardar PET yana ba da fayyace iri ɗaya da samar da aiki a ƙaramin farashi. Antistatic APET shine mai yarda da FDA don tuntuɓar abinci kuma RoHS bokan, yana mai da shi abu biyu-manufa dace da 

duka kayan lantarki-aji da yanayin marufi.

• Juriya na Surface: 10⁹ - 10⊃1; ⊃1; Ω/sq

• Nisa Nisa: 0.15mm - 2.0mm

• Matsakaicin Nisa: 1200mm (wanda aka saba dashi)

• Gaskiya: ≥89%

• Zafin Sabis: -20°C zuwa 60°C

• Form: Sheet ko Roll

• Launi: bayyananne, Haske shuɗi (mai gano ESD), Tint na al'ada

Me yasa Kariyar Antistatic ke da mahimmanci a cikin Kayan Lantarki

Hidden Cost of Electrostatic Discharge (ESD)

Fitar wutar lantarki yana ɗaya daga cikin manyan abubuwan da ke haifar da lahani a masana'antar lantarki. Daidaitaccen kayan marufi na filastik na iya haifar da wutar lantarki sama da 1,000V yayin sarrafawa da jigilar kayayyaki na yau da kullun. Koyaya, yawancin abubuwan haɗin lantarki masu mahimmanci - gami da haɗaɗɗun da'irori (ICs), CPUs, na'urori masu auna firikwensin MEMS, da kwakwalwan LED - na iya fuskantar lalacewa ta dindindin daga fitarwa mai ƙasa da 100V.

Ƙungiyar EOS/ESD ta ƙiyasta cewa lalacewar da ta shafi ESD tana kashe masana'antar semiconductor na duniya sama da dala biliyan 5 kowace shekara. Abin da ke sa ESD ke da haɗari musamman shine ɓarnawar ɓoyayyiyar ɓoyayyiyar ɓoyayyiyar ɓoyayyiyar ɓarna ce: wani sashi na iya wuce ingantacciyar dubawa duk da haka ya gaza da wuri a cikin filin, yana haifar da da'awar garanti, tunawa da samfur, da lahani na mutunci.

Yin amfani da kayan marufi masu dacewa shine hanya mafi sauƙi kuma mafi tsada don kawar da hadarin ESD a tushen.

Yadda Antistatic APET ke Aiki

Akwai hanyoyi guda biyu na gama gari don cimma aikin antistatic a cikin takaddun PET:

1. Rufin saman (Tsarin Kan layi) Ana amfani da wakili na antistatic a saman takardar PET da aka gama. Wannan hanya tana da ƙasa a cikin farashi, amma rufin yana da rauni ga lalata, wankewa, da lalacewa. Ayyukan antistatic na iya raguwa sosai akan lokaci.

2. Gina-in Antistatic Agent (Inline Tsari) An antistatic ƙari ne blended a cikin PET guduro a lokacin extrusion, rarraba shi a ko'ina cikin kayan matrix. Wannan hanya ta fi tsada amma tana ba da aikin dindindin na dindindin ko na dindindin wanda baya dogaro da shimfidar ƙasa.

ONE Plastic's antistatic APET yana amfani da tsarin ginannen ciki (layi). An saka wakilin antistatic a cikin takardar, yana tabbatar da:

• Tasirin antistatic baya raguwa tare da abrasion, wankewa, ko maimaita amfani

• Aiki ya kasance barga ba tare da la'akari da yanayin zafi da sauyin yanayi ba

• Juriya na saman yana tsayawa a cikin 10⁹-10⊃1;⊃1; Ω/sq kewayon tsawon rayuwar sabis na samfurin

• Ba a saki hazo, ƙura, ko gurɓatawa daga saman

Rarraba Material ESD

Fahimtar matakai daban-daban na kariyar ESD yana taimakawa wajen zaɓar kayan da ya dace: Juriya

na Nau'in Abu	(Ω/sq)	Halayen
Gudanarwa	10⊃ 3; ku 10⁵	Ƙananan juriya; caji yana gudana da sauri zuwa ƙasa. An yi amfani da shi don abubuwan da ke da mahimmanci.
A tsaye Dissipative	10 zuwa 10	Sarrafa, raguwar cajin caji. Ya dace da na'urorin Class 0 da Class 1.
Antistatic	10 zuwa 10 ⊃ 1; 2;	Yana hana gina caji a tsaye. Isasshen mafi daidaitaccen marufi na lantarki.
Insulative	10⊃1;⊃2;	Babu kariyar ESD. Daidaitaccen robobi sun fada cikin wannan rukuni.

APET antistatic ONE Plastics yana faɗi cikin kewayon antistatic (10⁹–10⊃1;⊃1; Ω/sq), yana sa ya dace da mafi yawan aikace-aikacen marufi na kayan lantarki.

Ƙididdiga na Fasaha

Ƙirar Jiki & Kanikanci

Ƙimar	Hanyar	Gwajin
Juriya na Surface	10⁹ - 10 ⊃ 1; 1; Ω/sq	Saukewa: ASTM D257
Ƙarfin Ƙarfin Ƙarfi	≥55 MPa	Saukewa: ASTM D882
Tsawaitawa a Break	≥80%	Saukewa: ASTM D882
Yawan yawa	1.33 - 1.35 g / cm 3;	Saukewa: ASTM D792
Haze	≤3%	Saukewa: ASTM D1003
Watsawa Haske	≥89%	Saukewa: ASTM D1003

Yarda da Ka'idodin Ayyukan Antistatic

Madaidaicin Matsayin Halin Da Aka	Aiwatar	da shi
Saukewa: IEC 61340-5-1	A tsaye Dissipative	Kayan kayan lantarki
ANSI/ESD S20.20	Mai yarda	Amfani da Yankin Kariyar ESD (EPA).
MIL-PRF-81705	Nau'in II	Kayan aikin soja & sararin samaniya

Akwai Zaɓuɓɓukan

Ma'auni	Sigar
Kauri	0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm
Nisa	300mm - 1200mm (akwai nisa na al'ada)
Siffar	Sheet ko Roll (50-150 kg / yi)
Launi	Bayyananne (m), Haske mai haske (mai gano ESD), tint na al'ada
Marufi	Fim ɗin PE na ciki + jakunkuna da aka saka; palletized tare da kusurwa masu kariya akan buƙata

Aikace-aikace na Antistatic APET Sheet

Ana amfani da takardar Antistatic APET a ko'ina cikin masana'antu waɗanda ke sarrafa samfuran masu hankali. Haɗin sa na kariyar ESD, babban tsabta, da kyakkyawan yanayin thermoformability ya sa ya zama abin da aka fi so don marufi daidai.

Kayan Lantarki & Semiconductor Packaging

Wannan shine farkon aikace-aikacen APET antistatic. An ƙera takardar zuwa cikin trays, masu ɗaukar kaya, clamshells, da murfi da ake amfani da su don shiryawa:

• IC kwakwalwan kwamfuta da microprocessors

• Allolin kewayawa (PCBs)

• Hard faifai (HDDs) da faifai masu ƙarfi (SSDs)

• LED sassa da nuni modules

• Masu haɗawa, kwasfa, da ƙayyadaddun ƙwaƙwalwar ajiya

• Modulolin kyamara da na'urori masu auna gani

Madaidaicin kaddarorin antistatic na dindindin yana tabbatar da cewa babu ƙura da ke faɗuwa lokacin da kayan aikin lantarki ke shafa saman tire yayin jigilar kaya - muhimmin buƙatu don marufi mai tsafta mai tsafta.

Na'urar Likita & Kunshin Magunguna

Za a iya amfani da zanen gadon APET na antistatic don kunshin na'urorin likitanci masu mahimmanci, kayan aikin bincike, da abubuwan da za a iya dasa su. Kayan yana ba da shinge mara kyau don hana gurɓatawa yayin da kayan sa na ESD ke kare da'irorin lantarki masu mahimmanci waɗanda ke cikin na'urorin likitanci na zamani. Yarda da FDA ya sa ya dace da mahallin ɗaki mai tsabta. Don marufi na sarkar sanyi wanda kuma ke buƙatar ganin danshi, la'akari da haɗawa da namu anti-hazo PET filastik takardar.

Masana'antu & Kayan Wutar Lantarki na Motoci

Masana'antar kera motoci, sararin samaniya, da masana'antar sadarwa suna ƙara dogaro da fakitin antistatic don:

• Abubuwan da aka haɗa ECU na Mota (Electronic Control Unit).

• Aerospace avionics da na'urorin firikwensin

• Kayan lantarki tushe tashar sadarwa

• Kayan aikin auna daidai

Kwatanta Material: Zaɓin Kariyar ESD Dama

Zaɓin madaidaicin kayan marufi na ESD ya dogara da matakin azanci na abubuwan haɗin ku da farashin ku/bukatun ayyuka.

Lokacin da za a zaɓi APET Antistatic: Ga mafi yawan abubuwan lantarki - ICs, PCBs, LEDs, masu haɗawa, da na'urorin lantarki - APET antistatic (10⁹-10⊃1; ⊃1; Ω/sq) yana ba da isasshen kariya ta ESD a farashi mai gasa tare da kyakkyawan haske.

Lokacin da za a zaɓi APET Conductive: Don abubuwan da ke da mahimmanci kamar wafers na semiconductor, Class 0 na'urorin ESD masu hankali, ko aikace-aikacen da ke buƙatar garkuwar Faraday keji, APET mai gudanarwa (10⁴–10⁶ Ω/sq) tare da saurin caji ana ba da shawarar.

Jagoran Gudanarwa

Thermoforming 

Ayyukan APET na antistatic akan daidaitaccen kayan aikin thermoforming tare da sigogi masu kama da daidaitaccen APET. Don ƙarin cikakkun bayanai kan thermoforming tare da kayan PET ɗin mu, duba mu vacuum forming mafita shafi.

Ƙimar	da aka Shawarar Siga
Samar da Zazzabi	80 ° C - 110 ° C
Mold Zazzabi	60 ° C - 80 ° C
Pre-bushewa	65 ° C na 2-4 hours kafin kafa
Ayyukan ESD bayan kafa	Cikakkun da aka riƙe - antistatic Properties ba su shafi tsarin thermoforming

Lura: Idan yanayin zafi ya wuce 120 ° C, APET na iya fara yin kyalkyali kuma ya rasa gaskiya. Ci gaba da sarrafawa cikin iyakar da aka ba da shawarar.

Daidaituwar Buga &

Hanyar	Rufi
Buga UV	Cikakken jituwa
Buga allo	Cikakken jituwa
Ana Bukatar Farko	A'a - tawada yana manne kai tsaye zuwa saman
Lambobin Gargaɗi na ESD	Mai jituwa - alamun ba za su tsoma baki tare da tsayayyar saman ba

Adana & Gudanarwa

Takaddun shaida & Biyayya

Ana samar da takardar APET na antistatic ONE Plastic a cikin wani ISO 9001 ingantaccen kayan aiki kuma ya bi ka'idodin ƙasashen duniya masu zuwa:

• FDA 21 CFR 177.1315 - Mai yarda da tuntuɓar abinci, dacewa da marufi na kayan lantarki da layin marufi biyu

• RoHS 3.0 - Ƙuntata abubuwa masu haɗari a cikin kayan lantarki da lantarki

• SANARWA SVHC - Mai yarda da ƙa'idodin EU akan abubuwan da ke damun su sosai

• IEC 61340-5-1 - Matsayin lantarki na duniya don kariyar na'urorin lantarki

• TS EN ISO 9001 - Takaddun tsarin gudanarwa na inganci

Ana samun rahotannin gwaji na ɓangare na uku akan buƙata, gami da:

• Rahoton gwajin juriya na saman (ɗayan gwaje-gwaje mai zaman kansa)

• Rahoton gwajin ƙaura (cire lafiyar abinci)

• Rahoton gwajin tsufa (ƙararfin antistatic akan lokaci)

Keɓancewa & MOQ

Filastik DAYA yana ba da gyare-gyare mai sauƙi tare da MOQ wanda ya fara daga kilogiram 500 - yana ƙasa da ma'aunin masana'antar kilogiram 2,000.

Abin da Za Mu Iya Keɓancewa

MOQ & Lokacin Jagora

Me yasa oda daga filastik DAYA

• Farashi kai tsaye na masana'anta - 20-30% tanadin farashi idan aka kwatanta da kamfanonin ciniki

• Ƙananan sassaucin MOQ - 500 kg mafi ƙarancin don daidaitattun ƙayyadaddun bayanai vs. 2,000 kg matsakaicin masana'antu

• Amsar fasaha mai sauri - Tallafin fasaha a cikin sa'o'i 4

• Takaddun shaida biyu - FDA (jin-abinci) + RoHS (jin lantarki) akan samfurin iri ɗaya

• Tallafin harsuna biyu - akwai takaddun fasaha na Ingilishi da Sinanci

Jawabin Abokin Ciniki

'Lalacewar ESD ta ragu daga kashi 3% zuwa 0.1% bayan canjawa zuwa ONE Plastic's antistatic APET. ROI ta biya kanta cikin kashi ɗaya cikin huɗu. '

'Tsarin juriyar juriya na saman bayan tsari. Mun yi oda sama da shekaru biyu kuma ingancin koyaushe abin dogaro ne.' - Kamfanin Packaging Semiconductor, Malaysia

'Tsalle yana da kyau sosai - na'urorin binciken mu ba su da matsala karantawa ta cikin marufi, wanda ke adana lokaci mai yawa akan bene na sito.' - Mai ba da Saji don Lantarki, Jamus

Tambayoyin da ake yawan yi

Har yaushe ne dukiyar antistatic zata wuce?

Our antistatic APET yana kula da juriya na sama na tsawon watanni 12+ a ƙarƙashin ingantaccen yanayin ajiya (a ƙasa 30 ° C, ƙasa da 60% zafi). Saboda an shigar da wakili na antistatic a ko'ina cikin kayan - ba a yi amfani da shi azaman rufin saman ba - ba zai goge ba, wankewa, ko rasa tasiri tare da kulawa da amfani da al'ada.

Shin APET antistatic lafiya ne don aikace-aikacen hulɗar abinci?

Ee. APET antistatic ɗinmu yana da cikakkiyar yarda da FDA 21 CFR 177.1315 don amfanin abincin-abinci. Ya dace da marufi na lantarki a wuraren sarrafa abinci, ko don layukan marufi guda biyu waɗanda ke sarrafa kayan abinci da na lantarki.

Za a iya sake yin amfani da APET antistatic?

Ee. Ana iya sake yin amfani da Antistatic APET a ƙarƙashin lambar shaidar resin #1 (PET). Saboda yana ƙunshe da abin da ake ƙara antistatic, muna ba da shawarar tuntuɓar wurin sake yin amfani da su na gida game da ka'idojin karɓunsu don gyaran resin PET.

Menene bambanci tsakanin APET antistatic da conductive?

Antistatic APET (juriyawar saman 10⁹-10⊃1; ⊃1; Ω/sq) yana watsar da cajin a hankali a hankali, yana hana abubuwan fitar da sauri. Zaɓin da ya dace don yawancin kayan lantarki.

Tashoshin APET masu aiki (juriyawar saman 10⁴–10⁶ Ω/sq) tashoshi suna caji kusan nan da nan kuma suna ba da matakin kariya na lantarki. Ana ba da shawarar don abubuwan da ke da mahimmanci kamar su wafers na semiconductor da na'urori masu hankali na Class 0 ESD.

Menene bambanci tsakanin PET mai rufi da ginanniyar antistatic?

PET antistatic mai rufi yana da wakili na antistatic da aka yi amfani da shi a saman takardar bayan extrusion. Yana da ƙasa a cikin farashi amma rufin yana iya lalacewa ta hanyar abrasion, danshi, ko kulawa, yana haifar da aiki don raguwa akan lokaci.

Gina-in (layi) antistatic PET - nau'in Filastik GUDA DAYA - yana haɗa wakili na antistatic a cikin guduro yayin extrusion. Ayyukan na dindindin ne, daidaitacce a duk faɗin kauri, kuma bai shafe ta ta fuskar fuska ba.

Zan iya samun samfurori kafin yin oda mai yawa?

Ee. Muna ba da samfurori masu girman A4 kyauta (210 × 297mm) don kimantawa da gwaji. Don yawan gwaji mafi girma, tuntuɓi ƙungiyar tallace-tallace mu kuma za mu shirya jigilar samfurin al'ada.

Fara

Shin kuna shirye don kare kayan aikin ku na lantarki tare da ingantaccen marufi na antistatic?

• Neman Samfurin Kyauta - Samfuran masu girman A4 da aka aika a cikin kwanakin kasuwanci 3

• Sami Quote na Musamman - Faɗa mana ƙayyadaddun bayanai kuma za mu amsa cikin sa'o'i 24

• Zazzage Takardar Bayanan Fasaha (TDS) - Cikakkun bayanai a cikin tsarin PDF

• Yi magana da Kwararrun Fasaha - Tuntuɓe mu ta WhatsApp ko imel don tallafi na gaggawa

Tuntuɓar: aiki@one-plastic.com