Rigid PVC Film Roll for Christmas Tree Leaves

Rigid PVC film roll is the primary raw material used in the production of artificial Christmas tree leaves, garlands, wreaths, and PVC grass fence strips. Supplied in roll form, this calendered rigid PVC film is designed to be fed directly into leaf-drawing machines (4-line leaf-pulling machines) and automatic cutting equipment used on Christmas tree production lines.

ONE Plastic manufactures rigid PVC film rolls specifically for artificial tree and fence producers. Our film is produced using virgin PVC resin on advanced calendering lines, delivering consistent thickness, color uniformity, and the tear resistance required for high-speed mechanical leaf drawing. We supply Christmas tree factories and grass fence manufacturers across Asia, the Middle East, Eastern Europe, and Latin America.

For a broader overview of all our PVC film products for the Christmas tree industry, including production guidance, machinery, and turnkey factory setup, see our PVC Christmas Tree Film category page.

• Material: Rigid PVC (polyvinyl chloride), calendered film

• Thickness: 0.07mm - 0.30mm

• Width: 400mm - 1400mm (custom widths available)

• Form: Roll

• Standard Colors: Green (col 691, col 3330, col 322), Dark Green, Light Green

• Custom Colors: Brown, White, Black, Red, and custom color matching

• Surface: Smooth or embossed (multiple emboss patterns available)

• Key Properties: Tear resistant, UV resistant, self-extinguishing, waterproof

Why This PVC Film Roll Is Used for Christmas Tree Production

Artificial Christmas tree leaves are made by feeding rigid PVC film into a leaf-drawing machine alongside wire. The machine extrudes the film into flat strips, then cuts and twists them at high speed to create realistic-looking pine needle clusters. This production process places specific demands on the film material that standard PVC sheet or soft PVC film cannot meet.

Tear Resistance: The film must withstand high-speed mechanical pulling, twisting, and cutting without tearing or splitting. Rigid PVC film provides the stiffness and tear strength needed for continuous, reliable leaf-drawing machine operation.

Consistent Thickness: Variation in film thickness causes feeding problems and uneven leaf quality on the production line. Our calendered film is produced with controlled thickness tolerance across the roll, helping maintain uniform leaf output throughout the production run.

Color Stability: Christmas tree film must hold its color over multiple seasons of display. Our PVC rigid film uses high-grade pigments with strong UV resistance, so the green color does not fade significantly under indoor lighting or sheltered outdoor conditions.

Emboss Compatibility: Many Christmas tree producers prefer embossed film to create a more natural, textured leaf appearance. Our film is available with multiple emboss patterns that are applied during the calendering process and remain stable through the leaf-drawing and cutting stages.

Self-Extinguishing Properties: Artificial Christmas trees are indoor decorative products often placed near electrical lights. Our rigid PVC film offers self-extinguishing characteristics, which is an important safety consideration for this type of product. Contact our team for specific flame rating documentation if required for your market.

Specifications

Color Guide for Christmas Tree & Grass Fence Production

Applications

Artificial Christmas Tree Leaves

This is the primary application. The rigid PVC film roll is fed into 4-line leaf-drawing machines to produce artificial pine needle clusters. The film is extruded alongside wire, cut into strips, and twisted to form realistic Christmas tree branches. Our film is compatible with standard Chinese-manufactured leaf-drawing machines and cutting equipment used by Christmas tree factories worldwide.

For Christmas tree factories that need both raw materials and production equipment, ONE Plastic also provides Christmas tree production machinery including leaf-drawing machines, branch-tying machines, and PE injection systems.

Garlands and Wreaths

The same rigid PVC film is used to produce garlands, wreaths, and decorative swags. For garland production, the film is typically processed into longer, continuous leaf strips and wound around wire frames.

Artificial Grass Fence

Rigid PVC film in dark green and light green is cut into narrow strips and woven or attached to wire mesh to create artificial grass fence panels. This application has grown in popularity in the Middle East and Eastern Europe. For more details on PVC film specifically for fence applications, see our PVC fence grass film page.

Decorative Holiday Products

Beyond trees and fences, rigid PVC film is used to produce a range of seasonal decorative items including table centerpieces, window decorations, and floral accent pieces.

How Rigid PVC Film Is Used on the Production Line

Understanding the production workflow helps buyers specify the right film characteristics:

Step 1 - Slitting: Large-width master rolls are slit into narrower rolls using an automatic PVC film cutting machine, matched to the feed width of the leaf-drawing machine.

Step 2 - Leaf Drawing: Narrow PVC film rolls and wire are loaded into a 4-line leaf-drawing machine. The machine extrudes the film into flat strips and uses high-speed rotation to cut and twist the strips into pine needle clusters attached to wire.

Step 3 - Branch Cutting: The long, continuous leaf-on-wire output is fed into an automatic branch cutting machine, which cuts it into uniform branch segments (typically around 20 cm).

Step 4 - Branch Tying: Individual branch segments are bundled into larger composite branches using a branch-tying machine.

Step 5 - Tree Assembly: Finished branches are inserted into trunk hanging rings, and the base is attached to complete the artificial Christmas tree.

ONE Plastic supplies both the raw material (this PVC film roll) and the production machinery for steps 1-4. Contact our team if you need a complete turnkey supply package.

Why Choose ONE PLASTIC?

Dedicated Christmas Tree Film Production: ONE Plastic is not a general-purpose PVC supplier adding Christmas tree film as a sideline. We have years of focused experience supplying PVC rigid film specifically to Christmas tree and grass fence factories. We understand the production line requirements and can advise on thickness, color, emboss, and roll width selection for your specific equipment.

Virgin PVC Resin: We use virgin material to help ensure consistent color, thickness, and tear performance. Recycled or mixed resin can cause color variation, inconsistent thickness, and tearing on the leaf-drawing machine, problems that lead to production downtime and waste.

ISO 9001 Certified: Batches are tested for thickness tolerance, color consistency, tear resistance, and roll quality before shipment.

Complete Supply Chain: Beyond raw film, we supply Christmas tree production machinery, PE granules, artificial pine needles, and technical production guidance, making ONE Plastic a one-stop partner for Christmas tree factory setup and operation.

Custom Colors and Emboss: We offer standard green colors (col 691, 3330, 322) plus custom color matching and multiple emboss patterns to differentiate your product in the market.

Packaging and Delivery

Frequently Asked Questions

What thickness should I use for Christmas tree leaves?

The most common thickness range for Christmas tree leaf production is 0.10mm-0.20mm. Thinner film (0.07-0.10mm) produces softer, more flexible leaves, while thicker film (0.15-0.20mm) produces stiffer, more structured needles. The best choice depends on your leaf-drawing machine settings, target product style, and end-market preference. We can provide samples in multiple thicknesses for production trials.

What is the difference between col 691, col 3330, and col 322?

These are standard green color codes used across the Christmas tree manufacturing industry. Col 691 is the most widely used standard Christmas green. Col 3330 is a darker, richer green often used for premium product lines or mixed with col 691 to add visual depth. Col 322 is an alternative green tone that is popular in certain regional markets, particularly the Middle East and Eastern Europe.

Can I get embossed film?

Yes. We offer multiple emboss patterns including fine grain, coarse grain, and pine needle texture. Embossed film creates a more natural, realistic appearance in the finished Christmas tree leaf. The emboss is applied during the calendering process and remains stable through the leaf-drawing and cutting stages.

Is this film compatible with my existing leaf-drawing machine?

Our rigid PVC film is compatible with standard 4-line leaf-drawing machines commonly used in China-based and export-market Christmas tree factories. If you are unsure about compatibility, send us your machine specifications and required film dimensions, and our technical team can confirm the right film specification for your equipment.

Do you also supply Christmas tree production machinery?

Yes. In addition to PVC rigid film, ONE Plastic supplies a complete range of Christmas tree production equipment including automatic film cutting machines, 4-line leaf-drawing machines, branch cutting machines, branch-tying machines, PE injection machines, and robotic arms. Contact our team for a complete equipment and raw material quotation.

What is the minimum order quantity?

Contact our sales team for current MOQ based on your required thickness, width, color, and emboss pattern. We serve both large-volume Christmas tree factories and smaller producers.

Get an Instant Quote

Looking for a reliable rigid PVC film roll supplier for your Christmas tree or grass fence production?

• Request Samples - Sample rolls in your required thickness, color, and emboss for production trial

• Get a Custom Quote - Tell us your thickness, width, color, and quantity

• Speak to a Product Expert - Contact us via WhatsApp or email for technical support

Contact: operation@one-plastic.com

Related Products: PVC Christmas Tree Film (Full Range) | PVC Fence Grass Film | Christmas Tree Production Series

Related Resources: The Production Process of Artificial Christmas Tree | Quality Control & Certifications | Contact Us