Green PVC Rigid Film for Artificial Christmas Tree Leaves

Green PVC rigid film is the primary raw material used to produce artificial Christmas tree leaves. Supplied in roll form, this calendered rigid PVC film is fed into leaf-drawing machines alongside wire, where it is extruded into flat strips, cut, and twisted at high speed to create the pine needle clusters that form the branches of artificial Christmas trees.

This page covers green PVC rigid film specifically as a Christmas tree leaf production material. It is a product within ONE Plastic's PVC Christmas tree film range, available in multiple green shades including the industry-standard color codes (col 691, col 3330, col 322) as well as custom greens.

ONE Plastic manufactures this film using virgin PVC resin on advanced calendering lines and supplies it to Christmas tree factories across Asia, the Middle East, Eastern Europe, and Latin America.

• Material: Rigid PVC (polyvinyl chloride), calendered film

• Colors: Light green, Dark green, Col 691, Col 3330, Col 322, Custom greens

• 
  

• Thickness: 0.07mm - 0.30mm

• Width: 400mm - 1400mm (custom widths available)

• Surface: Smooth or embossed

• Form: Roll

• Key Properties: Tear resistant, UV resistant, self-extinguishing, consistent color

Why Green PVC Rigid Film Is Chosen for Christmas Tree Leaves

The artificial Christmas tree leaf production process places specific demands on the film material. Standard PVC sheet or soft PVC film cannot meet these requirements.

Tear Resistance for Leaf Drawing: The film is pulled, twisted, and cut at high speed in a leaf-drawing machine. It must resist tearing and splitting during this mechanical process. Rigid PVC film provides the stiffness and tear strength needed for continuous, reliable operation.

Natural Green Appearance: The green color is formulated to replicate the look of natural pine and fir needles. ONE Plastic offers multiple green shades so tree manufacturers can match the specific appearance their target market expects - from light spring greens to deep forest greens.

Color Consistency Across Rolls: Christmas tree manufacturers process large volumes of film across multiple production runs. The green shade must be consistent from roll to roll to avoid visible color variation in the finished tree. Our controlled pigment formulation helps maintain batch-to-batch color uniformity.

UV Resistance: Artificial Christmas trees may be displayed near windows or in sheltered outdoor settings. UV-resistant pigments and additives help the green color resist fading over multiple seasons of use.

Emboss Options for Realistic Texture: Embossed film creates leaves with a more natural, textured appearance compared to smooth film. We offer multiple emboss patterns that remain stable through the leaf-drawing and cutting process.

Self-Extinguishing Properties: Christmas trees are indoor decorative products often placed near electrical lights. Our film offers self-extinguishing characteristics under standard test conditions, which is an important safety consideration.

Available Green Shades

Many Christmas tree manufacturers use two or more green shades on the same tree to create a more natural, multi-tonal appearance. We can supply multiple color rolls in the same order.

Specifications

Thickness Selection for Christmas Tree Leaves

The best thickness depends on your leaf-drawing machine settings, target product style, and end-market preference. We can provide sample rolls in multiple thicknesses for production trials.

How This Film Is Used in Production

This green PVC rigid film is the starting material for Christmas tree leaf production:

Step 1 - Slitting: Master rolls are slit into narrower rolls matched to the feed width of the leaf-drawing machine.

Step 2 - Leaf Drawing: Narrow PVC film rolls and wire are loaded into a 4-line leaf-drawing machine, which extrudes the film into flat strips and twists them at high speed to create pine needle clusters attached to wire.

Step 3 - Branch Cutting: The continuous leaf-on-wire output is cut into uniform branch segments (typically 15-25 cm) by an automatic cutting machine.

Step 4 - Branch Tying: Branch segments are bundled into larger composite branches.

Step 5 - Tree Assembly: Finished branches are inserted into trunk hanging rings to complete the artificial Christmas tree.

ONE Plastic supplies both this raw film material and the production machinery used in Steps 1-4. Contact our team if you need a complete material-plus-equipment package.

Why Choose ONE PLASTIC?

Dedicated Christmas Tree Film Producer: We have years of focused experience supplying PVC rigid film to Christmas tree factories. We understand the production line requirements and can advise on color, thickness, emboss, and roll width selection for your specific equipment and market.

Multiple Green Shades from One Factory: We produce col 691, col 3330, col 322, light green, dark green, and custom greens on the same calendering lines. You can source all your color requirements in a single order.

Virgin PVC Resin: We use virgin material to help ensure consistent color, thickness, and tear performance.

ISO 9001 Certified: Batches are tested for thickness tolerance, color consistency, tear resistance, and roll quality before shipment.

Complete Supply Chain: Beyond raw film, we also supply PVC fence grass film for artificial fence production, Christmas tree production machinery, PE granules, and artificial pine needles - making ONE Plastic a one-stop partner for Christmas tree and seasonal product manufacturers.

Packaging and Delivery

Item	Details
Roll Packaging	PE inner wrap + kraft paper + PP belt strapping
Pallet Packaging	Rolls palletized with corner protectors and stretch wrap
Roll Weight	Typically 50-150 kg per roll
Lead Time	Typically 10-15 days after order confirmation
Shipping	Sea freight (FCL & LCL), air freight, or land transport
Marks	Neutral packing; custom printed marks available

Seasonal timing note: Christmas tree production typically peaks in Q2-Q3. We recommend placing raw material orders in Q1-Q2 to ensure availability and timely delivery before your production season.







Frequently Asked Questions

What green colors are available?

We offer col 691 (standard Christmas green), col 3330 (darker green), col 322 (alternative green), plus light green, dark green, and custom color matching. Custom colors are subject to MOQ requirements.




What thickness is best for Christmas tree leaves?

The most common range is 0.10mm-0.15mm. Thinner film (0.07-0.10mm) produces softer, more flexible leaves, while thicker film (0.15-0.20mm) produces stiffer needles. The best choice depends on your machine settings and target product style. We recommend requesting samples for production trials.




Can I get embossed film?

Yes. We offer multiple emboss patterns including fine grain, coarse grain, and pine needle texture. Embossed film creates a more natural appearance in the finished leaf. The emboss remains stable through the leaf-drawing and cutting process.




Is this the same film used for artificial grass fence?

The base material is similar (rigid PVC film), but grass fence film and Christmas tree film are optimized differently. Fence film prioritizes UV resistance for permanent outdoor exposure, while Christmas tree film prioritizes color accuracy and leaf-drawing machine compatibility. For fence-specific film, see our PVC fence grass film page.




Do you also supply Christmas tree production machinery?

Yes. In addition to raw PVC film, we supply leaf-drawing machines, branch cutting machines, branch-tying machines, PE injection machines, and robotic arms. Contact our team for a complete equipment and material quotation.




What is the minimum order quantity?

Contact our sales team for current MOQ based on your required color, thickness, width, and emboss pattern.







Get an Instant Quote

Looking for green PVC rigid film for your Christmas tree production?

• Request Samples - Evaluate color, thickness, emboss, and leaf-drawing performance

• Get a Custom Quote - Tell us your color, thickness, width, and quantity

• Speak to a Product Expert - Contact us via WhatsApp or email for technical support

Contact: operation@one-plastic.com